StoRM System Administration Guide

version: 1.11.12

Table of contents


Upgrading from StoRM v1.11.11  

Follow the following instructions when you are upgrading StoRM from v1.11.11.

1. Update the involved packages

Services to be updated are:

  • storm-backend-server
  • storm-native-libs
  • storm-frontend-server
  • storm-webdav
  • yaim-storm

Example:

$ yum update storm-backend-server storm-frontend-server storm-webdav storm-native-libs yaim-storm
2. Update the namespace schema

You should have a .rpmnew file on disk:

$ cd /etc/storm/backend-server
$ mv namespace-1.5.0.xsd namespace-1.5.0.xsd.rpmold
$ mv namespace-1.5.0.xsd.rpmnew namespace-1.5.0.xsd
3. Remove storm-gridhttps-plugin

It’s a component that is no more used and with old java dependencies that MUST be removed:

$ yum remove storm-gridhttps-plugin
4. Remove old Java versions

Since this version, the storm-backend-server, storm-webdav and storm-native-libs rpms explicitly REQUIRES JAVA 8.

java -version will tell which is the active version on your system:

$ java -version
openjdk version "1.8.0_131"
OpenJDK Runtime Environment (build 1.8.0_131-b11)
OpenJDK 64-Bit Server VM (build 25.131-b11, mixed mode)

Remove old java versions installed on your system with the following command:

$ yum remove java-1.6.0-openjdk java-1.7.0-openjdk java-1.7.0-openjdk-devel

If you have a more complex deployment and you can’t remove them, you can try to configure the active JRE using update-alternatives:

$ update-alternatives --config java
5. Relaunch YAIM configuration

Example:

$ /opt/glite/yaim/bin/yaim -c -s /etc/storm/siteinfo/storm.def \
  -n se_storm_backend \
  -n se_storm_frontend \
  -n se_storm_gridftp \
  -n se_storm_webdav

Installation Prerequisites  

Platform  

All the StoRM components are certified to work on Scientific Linux SL6/64 (x86_64) with an EPEL repository for external dependencies.

All the information about the OS Scientific Linux can be found at here.

There are no specific minimum hardware requirements but it is advisable to have at least 1GB of RAM on Backend host.

Requirements  

Each StoRM deployment requires some services and packages installed.

NTP service  

NTP service must be installed.

yum install ntp
chkconfig ntpd on
service ntpd restart

Hostname  

Hostname must be a Fully Qualified Domain Name (FQDN).

To check if your hostname is a FQDN, run:

hostname -f

The command must return the host FQDN.

If you need to correct it and you are using bind or NIS for host lookups, you can change the FQDN and the DNS domain name, which is part of the FQDN, in the /etc/hosts file.

# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1       MYHOSTNAME.MYDOMAIN MYHOSTNAME localhost.localdomain localhost
::1             localhost6.localdomain6 localhost6

Set your own MYHOSTNAME and MYDOMAIN and restart the network service:

service network restart

Host credentials  

Hosts participating to the StoRM-SE (Frontend, Backend, WebDAV and GridFTP hosts) service must be configured with X.509 certificates signed by a trusted Certification Authority (CA). Usually, the hostcert.pem and hostkey.pem certificates are located in the /etc/grid-security directory, and they must have permission 0644 and 0400 respectively:

ls -l /etc/grid-security/hostkey.pem
-r-------- 1 root root 887 Mar  1 17:08 /etc/grid-security/hostkey.pem

ls -l /etc/grid-security/hostcert.pem
-rw-r--r-- 1 root root 1440 Mar  1 17:08 /etc/grid-security/hostcert.pem

Check if certificate is expired as follow:

openssl x509 -checkend 0 -in /etc/grid-security/hostcert.pem

To change permissions, if necessary:

chmod 0400 /etc/grid-security/hostkey.pem
chmod 0644 /etc/grid-security/hostcert.pem

ACL support  

StoRM uses the ACLs on files and directories to implement the security model. In so doing, StoRM uses the native access to the file system. Therefore in order to ensure a proper running, ACLs need to be enabled on the underlying file-system (sometimes they are enabled by default) and work properly.

If the getfacl and setfacl commands are not available on your host you have to install acl package:

yum install acl

To check if all properly works, try to set an acl to a test file as follow:

touch test
setfacl -m u:storm:rw test

Note: the storm user adopted to set the ACL entry MUST exist.

getfacl test

Should return the following values:

# file: test
# owner: root
# group: root
user::rw-
user:storm:rw-
group::r--
mask::rw-
other::r--

To enable ACLs (if needed), you must add the acl property to the relevant file system in your /etc/fstab file. For example:

/dev/hda3     /storage      ext3     defaults, acl     1 2

Then you need to remount the affected partitions as follows:

mount -o remount /storage

This is valid for different file system types (i.e., ext3, xfs, gpfs and others).

Extended Attribute support  

StoRM uses the Extended Attributes (EA) on files to store some metadata related to the file (e.g. the checksum value); therefore in order to ensure a proper running, the EA support needs to be enabled on the underlying file system and work properly.

If the getfattr and setfattrl commands are not available on your host, install attr package:

yum install attr

To check if all properly works, try to set an extendend attribute to a test file:

touch testfile
setfattr -n user.testea -v test testfile
getfattr -d testfile

It should return:

# file: testfile
user.testea="test"

To enable EA (if needed) you must add the user_xattr property to the relevant file systems in your /etc/fstab file. For example:

/dev/hda3     /storage     ext3     defaults,acl,user_xattr     1 2

Then you need to remount the affected partitions as follows:

mount -o remount /storage

System users and file limits  

The StoRM Frontend, Backend and WebDAV services run by default as user storm. It’s recommended to keep the default settings and use the same user for all the services.

You can use the following commands to create the StoRM user on the machines where you are deploying the services:

useradd -M storm

The option -M means ‘without an home directory’. You could also use specific user and group IDs as follows (change the text contained in angled brackets with the appropriate numerical value for your installation):

useradd -M storm -u MY_STORM_UID -g MY_STORM_GID

Important

Keep UIDs and GIDs aligned for StoRM users and groups on distributed deployments (i.e. when the services are installed on different machines).
This can be done using NIS (see a tutorial here or LDAP (see How-to example).

File limits

The following settings are recommended to safely run the StoRM services. Put these settings in /etc/security/limits.conf or in a file contained in the /etc/security/limits.d directory (recommended):

storm hard nofile 65535
storm soft nofile 65535

Storage Area’s permissions  

All the Storage Areas managed by StoRM needs to be owned by the STORM_USER. This means that if STORM_USER is storm, for example, the storage-area test root directory permissions must be:

drwxr-x---+  2 storm storm

YAIM-StoRM doesn’t set the correct permissions if the SA’s root directory already exists. So, the site administrator has to take care of it. To set the correct permissions on a storage area, you can launch the following commands (assuming that storm runs as user storm, which is the default):

chown -RL storm:storm <sa-root-directory>
chmod -R 750 <sa-root-directory>

Site administrator must also make traversable by other users the parent directories of each storage-area root directory (that’s usually the same directory for all the storage-areas):

chmod o+x <sa-root-directory-parent>

Installation guide  

Before installing storm components, install the required repositories.

Repositories  

StoRM packages can be obtained from the UMD repositories and/or from the StoRM product team package repository. The EGI Trust Anchors repository is also required.

UMD Repositories  

On each production machine that is to be configured for using the UMD repositories, site administrators must follow the installation instructions explained here.

In short, remove all UMD and EPEL related repos:

rm /etc/yum.repos.d/UMD-* /etc/yum.repos.d/epel-*

Install EPEL SL6 repositories:

wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm 
yum localinstall epel-release-6-8.noarch.rpm

Install UMD rpm pgp-key:

rpm --import http://repository.egi.eu/sw/production/umd/UMD-RPM-PGP-KEY

Install UMD repositories:

wget http://repository.egi.eu/sw/production/umd/3/sl6/x86_64/updates/umd-release-3.14.4-1.el6.noarch.rpm
yum localinstall umd-release–3.14.4-1.el6.noarch.rpm

EGI Trust Anchors Repository  

Install EGI Trust Anchors repository by following EGI instructions.

In short:

wget http://repository.egi.eu/sw/production/cas/1/current/repo-files/EGI-trustanchors.repo -O /etc/yum.repos.d/EGI-trustanchors.repo
yum install ca-policy-egi-core

The DAG repository must be disabled. If needed, set to 0 the enabled property in your /etc/yum.repos.d/dag.repo file.

StoRM Repositories  

The latest certified [StoRM packages][prod_repo_url] can be found in the StoRM production repository for [SL6][prod_repo_sl6]. Note that you should also have UMD repositories installed (as detailed above) for your setup to work as expected.

To install the StoRM production repository files, run the following commands (as root):

wget http://italiangrid.github.io/storm/repo/storm_sl6.repo -O /etc/yum.repos.d/storm_sl6.repo

Install StoRM components  

In order to install StoRM components refresh the yum cache:

yum clean all

To install the StoRM metapackages necessary to the SRM interface, install:

yum install emi-storm-backend-mp
yum install emi-storm-frontend-mp
yum install emi-storm-globus-gridftp-mp

If your StoRM Backend runs on top of GPFS, be sure to install the storm-native-libs-gpfs package:

yum install storm-native-libs-gpfs

If you want to add a WebDAV endpoint install also:

yum install storm-webdav

The storm-srm-client is distributed with the UI EMI components, but if you need it on your node you can install it using the command:

yum install emi-storm-srm-client-mp

Configuration  

StoRM is currently configured by using the YAIM tool, that is a set of configuration scripts that read a set of configuration files. If you want to go through the configuration, see the advanced configuration guide.

Optionally, as a quick start, you can follow these instructions to quickly configure StoRM.

First of all, download and install the pre-assembled configuration:

yum install storm-pre-assembled-configuration

and then edit /etc/storm/siteinfo/storm.def with:

STORM_BACKEND_HOST="<your full hostname>"

Set also the JAVA_LOCATION to:

JAVA_LOCATION="/usr/lib/jvm/java"

Then you can configure StoRM by launching YAIM with:

/opt/glite/yaim/bin/yaim -c -s /etc/storm/siteinfo/storm.def \
-n se_storm_backend \
-n se_storm_frontend \
-n se_storm_gridftp \
-n se_storm_webdav

as better explained here.

General YAIM variables  

Create a site-info.def file in your CONFDIR/ directory. Edit this file by providing a value to the general variables summarized in Tab.1.

Var. Name Description Mandatory
SITE_NAME It’s the human-readable name of your site used to set the Glue-SiteName attribute.
Example: SITE_NAME="INFN EMI TESTBED"
Yes
BDII_HOST BDII hostname.
Example: BDII_HOST="emitb-bdii-site.cern.ch"
Yes
NTP_HOSTS_IP Space separated list of the IP addresses of the NTP servers (preferably set a local ntp server and a public one, e.g. pool.ntp.org). If defined, /etc/ntp.conf will be overwritten during YAIM configuration. If not defined, the site administrator will be manage on his own the ntp service and its configuration.
Example: NTP_HOSTS_IP="131.154.1.103"
No
USERS_CONF Path to the file containing the list of Linux users (pool accounts) to be created. This file must be created by the site administrator. It contains a plain list of the users and their IDs. An example of this configuration file is given in /opt/glite/yaim/examples/users.conf file. More details can be found in the User configuration section in the YAIM guide. Yes
GROUPS_CONF Path to the file containing information on the map- ping between VOMS groups and roles to local groups. An example of this configuration file is given in /opt/glite/yaim/examples/groups.conf file. More details can be found in the Group configuration section in the YAIM guide. Yes
MYSQL_PASSWORD MySQL root password.
Example: MYSQL_PASSWORD="carpediem"
Yes
VOS List of supported VOs.
Example: VOS="test.vo dteam"
Yes
STORM_BE_XMLRPC_TOKEN Token used in communication to the StoRM Backend Yes

Table 1: General YAIM Variables.

StoRM Frontend variables  

Frontend specific YAIM variables are in the following file:

/opt/glite/yaim/examples/siteinfo/services/se_storm_frontend

Please copy and edit that file in your CONFDIR/services directory. You have to set at least the STORM_DB_PWD variable and check the other variables to evaluate if you like the default set or if you want to change those settings. Table 2 summaries YAIM variables for StoRM Frontend component.

Var. Name Description
ARGUS_PEPD_ENDPOINTS The complete service endpoint of Argus PEP server. Mandatory if STORM_FE_USER_BLACKLISTING is true. Example: https://host.domain:8154/authz
STORM_BACKEND_REST_SERVICES_PORT StoRM backend server rest port. Optional variable. Default value: 9998
STORM_BE_XMLRPC_PATH StoRM Backend XMLRPC server path.
Optional variable. Default value: /RPC2
STORM_BE_XMLRPC_PORT StoRM Backend XMLRPC server port.
Optional variable. Default value: 8080
STORM_CERT_DIR Host certificate directory for StoRM Frontend service. Optional variable. Default value: /etc/grid-security/${STORM_USER}
STORM_DB_HOST Host for database connection.
Optional variable. Default value: localhost
STORM_DB_PWD Password for database connection. Mandatory.
STORM_DB_USER User for database connection. Default value: storm
STORM_FE_ENABLE_MAPPING Enable the check in gridmapfile for client DN.
Optional variable. Available values: true, false. Default value: false
STORM_FE_ENABLE_VOMSCHECK Enable the check in gridmapfile for client VOMS attributes.
Optional variable. Available values: true, false. Default value: false
STORM_FE_GSOAP_MAXPENDING Max number of request pending in the GSOAP queue. Optional variable. Default value: 2000
STORM_FE_LOG_FILE StoRM frontend log file.
Optional variable. Default value: /var/log/storm/storm-frontend.log
STORM_FE_LOG_LEVEL StoRM Frontend log level.
Optional variable. Available values: KNOWN, ERROR, WARNING, INFO, DEBUG, DEBUG2.
Default value: INFO
STORM_FE_MONITORING_DETAILED Flag to enable/disable detailed SRM requests Monitoring. Optional variable. Available values: true, false. Default value: false
STORM_FE_MONITORING_ENABLED Flag to enable/disable SRM requests Monitoring.
Optional variable. Available values: true, false. Default value: true
STORM_FE_MONITORING_TIME_INTERVAL Time intervall in seconds between each Monitoring round. Optional variable. Default value: 60
STORM_FE_THREADS_MAXPENDING Max number of request pending in the Threads queue. Optional variable. Default value: 200
STORM_FE_THREADS_NUMBER Max number of threads to manage user’s requests. Optional variable. Default value: 50
STORM_FE_USER_BLACKLISTING Flag to enable/disable user blacklisting.
Optional variable. Available values: true, false. Default value: false
STORM_FE_WSDL WSDL to be returned to a GET request.
Optional variable. Default value: /usr/share/wsdl/srm.v2.2.wsdl
STORM_FRONTEND_OVERWRITE This parameter tells YAIM to overwrite storm-frondend.conf configuration file.
Optional variable. Available values: true, false. Default value: true
STORM_FRONTEND_PORT StoRM Frontend service port. Optional variable. Default value: 8444
STORM_PEPC_RESOURCEID Argus StoRM resource identifier. Optional variable. Default value: storm
STORM_PROXY_HOME Directory used to exchange proxies.
Optional variable. Default value: /etc/storm/tmp
STORM_USER Service user.
Optional variable. Default value: storm

Table 2: Specific StoRM Frontend Variables.

StoRM Backend variables  

Backend specific YAIM variables are in the following file:

/opt/glite/yaim/exaples/siteinfo/services/se_storm_backend

Please copy and edit that file in your CONFDIR/services directory. You have to set at least these variables:

  • STORM_BACKEND_HOST
  • STORM_DEFAULT_ROOT
  • STORM_DB_PWD

and check the other variables to evaluate if you like the default set or if you want to change those settings. Table 3 summaries YAIM variables for StoRM Backend component.

Var. Name Description
STORM_ACLMODE ACL enforcing mechanism (default value for all Storage Areas). Note: you may change the settings for each SA acting on STORM_[SA]_ACLMODE variable. Available values: aot, jit (use aot for WLCG experiments).
Optional variable. Default value: aot
STORM_ANONYMOUS_HTTP_READ Storage Area anonymous read access via HTTP. Note: you may change the settings for each SA acting on STORM_[SA]_ANONYMOUS_HTTP_READ variable.
Optional variable. Available values: true, false. Default value: false
STORM_AUTH Authorization mechanism (default value for all Storage Areas). Note: you may change the settings for each SA acting on STORM_[SA]_AUTH variable Available values: permit-all, deny-all, FILENAME.
Optional variable. Default value: permit-all
STORM_BACKEND_HOST Host name of the StoRM Backend server. Mandatory.
STORM_BACKEND_REST_SERVICES_PORT StoRM backend server rest port. Optional variable. Default value: 9998
STORM_CERT_DIR Host certificate directory for StoRM Backend service.
Optional variable. Default value: /etc/grid-security/STORM_USER
STORM_DEFAULT_ROOT Default directory for Storage Areas. Mandatory.
STORM_DB_HOST Host for database connection.
Optional variable. Default value: localhost
STORM_DB_PWD Password for database connection. Mandatory.
STORM_DB_USER User for database connection.
Optional variable. Default value: storm
STORM_FRONTEND_HOST_LIST StoRM Frontend service host list: SRM endpoints can be more than one virtual host different from STORM_BACKEND_HOST (i.e. dynamic DNS for multiple StoRM Frontends).
Mandatory variable. Default value: STORM_BACKEND_HOST
STORM_FRONTEND_PATH StoRM Frontend service path.
Optional variable. Default value: /srm/managerv2
STORM_FRONTEND_PORT StoRM Frontend service port. Optional variable. Default value: 8444
STORM_FRONTEND_PUBLIC_HOST StoRM Frontend service public host. It’s used by StoRM Info Provider to publish the SRM endpoint into the Resource BDII.
Mandatory variable. Default value: STORM_BACKEND_HOST
STORM_FSTYPE File System Type (default value for all Storage Areas). Note: you may change the settings for each SA acting on STORM_[SA]_FSTYPE variable.
Optional variable. Available values: posixfs, gpfs and test. Default value: posixfs
STORM_GRIDFTP_POOL_LIST GridFTP servers pool list (default value for all Storage Areas). Note: you may change the settings for each SA acting on STORM_[SA]_GRIDFTP_POOL_LIST variable.
ATTENTION: this variable define a list of pair values space-separated: host weight, e.g.: STORM_GRIDFTP_POOL_LIST="host1 weight1, host2 weight2, host3 weight3" Weight has 0-100 range; if not specified, weight will be 100.
Mandatory variable. Default value: STORM_BACKEND_HOST
STORM_GRIDFTP_POOL_STRATEGY Load balancing strategy for GridFTP server pool (default value for all Storage Areas). Note: you may change the settings for each SA acting on STORM_[SA]_GRIDFTP_POOL_STRATEGY variable.
Optional variable. Available values: round-robin, smart-rr, random, weight. Default value: round-robin
STORM_GRIDHTTPS_PUBLIC_HOST StoRM GridHTTPs service public host. It’s used by StoRM Info Provider to publish the WebDAV endpoint into the Resource BDII.
Optional variable, mandatory if the administrator wants to publish a WebDAV endpoint. Default value: STORM_BACKEND_HOST
STORM_INFO_FILE_SUPPORT If set to false, the following variables prevent the corresponding protocol to be published by the StoRM gip.
Optional variable. Available values: true, false. Default value: true
STORM_INFO_GRIDFTP_SUPPORT If set to false, the following variables prevent the corresponding protocol to be published by the StoRM gip.
Optional variable. Available values: true, false. Default value: true
STORM_INFO_RFIO_SUPPORT If set to false, the following variables prevent the corresponding protocol to be published by the StoRM gip.
Optional variable. Available values: true, false. Default value: false
STORM_INFO_ROOT_SUPPORT If set to false, the following variables prevent the corresponding protocol to be published by the StoRM gip.
Optional variable. Available values: true, false. Default value: false
STORM_INFO_HTTP_SUPPORT If set to false, the following variables prevent the corresponding protocol to be published by the StoRM gip.
Optional variable. Available values: true, false. Default value: false
STORM_INFO_HTTPS_SUPPORT If set to false, the following variables prevent the corresponding protocol to be published by the StoRM gip.
Optional variable. Available values: true, false. Default value: false
STORM_INFO_OVERWRITE This parameter tells YAIM to overwrite static-file-StoRM.ldif configuration file.
Optional variable. Available values: true, false. Default value: true
STORM_NAMESPACE_OVERWRITE This parameter tells YAIM to overwrite namespace.xml configuration file. Optional variable. Available values: true, false. Default value: true
STORM_PROXY_HOME Directory used to exchange proxies.
Optional variable. Default value: /etc/storm/tmp
STORM_RFIO_HOST Rfio server (default value for all Storage Areas). Note: you may change the settings for each SA acting on STORM_[SA]_RFIO_HOST variable.
Optional variable. Default value: STORM_BACKEND_HOST
STORM_ROOT_HOST Root server (default value for all Storage Areas). Note: you may change the settings for each SA acting on STORM_[SA]_ROOT_HOST variable.
Optional variable. Default value: STORM_BACKEND_HOST
STORM_SERVICE_SURL_DEF_PORTS Comma-separated list of managed SURL’s default ports used to check SURL validity.
Optional variable. Default value: 8444
STORM_SIZE_LIMIT Limit Maximum available space on the Storage Area (default value for all Storage Areas).
Note: you may change the settings for each SA acting on STORM_[SA]_SIZE_LIMIT variable. Optional variable. Available values: true, false. Default value: true
STORM_STORAGEAREA_LIST List of supported Storage Areas. Usually at least one Storage Area for each VO specified in VOS should be created.
Optional variable. Default value: VOS
STORM_STORAGECLASS Storage Class type (default value for all Storage Areas). Note: you may change the settings for each SA acting on STORM_[SA]_STORAGECLASS variable.
Optional variable. Available values: T0D1, T1D0, T1D1. No default value.
STORM_SURL_ENDPOINT_LIST This is a comma separated list of the SRM endpoints managed by the Backend. A SURL is accepted only if this list contains the endpoint specified. It’s an optional variable with default value: srm://STORM_FRONTEND_PUBLIC_HOST:STORM_FRONTEND_PORT/STORM_FRONTEND_PATH. So, if you want to accept requests with incoming SURLs that has the ip address instead of the FQDN hostname, add the full srm endpoint to this list.
STORM_USER Service user. Optional variable. Default value: storm
STORM_ENDPOINT_QUALITY_LEVEL Endpoint maturity level to be published by the StoRM gip. Optional variable. Default value: 2
STORM_ENDPOINT_SERVING_STATE Endpoint serving state to be published by the StoRM gip. Optional variable. Default value: 4
STORM_ENDPOINT_CAPABILITY Capability according to OGSA to be published by the StoRM gip. Optional variable. Default value: data.management.storage

Table 3: Specific StoRM Backend Variables.

Then, for each Storage Area listed in the STORM_STORAGEAREA_LIST variable, which is not the name of a valid VO, you have to edit the STORM_[SA]_VONAME compulsory variable (detailed in Table 4). SA has to be written in capital letters as in the other variables included in the site-info.def file, otherwise default values will be used.

Warning

For the DNS-like names, that use special characters as ‘.’ or ‘-‘ you have to remove the ‘.’ and ‘-‘.
For example the SA value for the storage area “test.vo” must be TESTVO:

STORM_TESTVO_VONAME=test.vo

For each storage area SA listed in STORM_STORAGEAREA_LIST you have to set at least these variables: STORM_[SA]_ONLINE_SIZE You can edit the optional variables summarized in Table 5.

Var. Name Description
STORM_[SA]_VONAME Name of the VO that will use the Storage Area. Use the complete name, e.g., “lights.infn.it” to specify that there is no VO associated to the storage area (it’s readable and writable from everyone - less than other filters). This variable becomes mandatory if the value of SA is not the name of a VO.
STORM_[SA]_ANONYMOUS_HTTP_READ Storage Area anonymous read access via HTTP.
Optional variable. Available values: true, false. Default value: false
STORM_[SA]_ACCESSPOINT List space-separated of paths exposed by the SRM into the SURL. Optional variable. Default value: SA
STORM_[SA]_ACLMODE See STORM_ACLMODE definition. Optional variable. Default value: STORM_ACLMODE
STORM_[SA]_AUTH See STORM_AUTH definition. Optional variable. Default value: STORM_AUTH
STORM_[SA]_DEFAULT_ACL_LIST A list of ACL entries that specifies a set of local groups with corresponding permissions (R, W, RW) using the following syntax: groupname1:permission1 [groupname2:permission2] […]
STORM_[SA]_DN_C_REGEX Regular expression specifying the format of C (Country) field of DNs that will use the Storage Area. Optional variable.
STORM_[SA]_DN_O_REGEX Regular expression specifying the format of O (Organization name) field of DNs that will use the Storage Area. Optional variable.
STORM_[SA]_DN_OU_REGEX Regular expression specifying the format of OU (Organizational Unit) field of DNs that will use the Storage Area. Optional variable.
STORM_[SA]_DN_L_REGEX Regular expression specifying the format of L (Locality) field of DNs that will use the Storage Area. Optional variable.
STORM_[SA]_DN_CN_REGEX Regular expression specifying the format of CN (Common Name) field of DNs that will use the Storage Area. Optional variable.
STORM_[SA]_FILE_SUPPORT Enable the corresponding protocol. Optional variable. Default value: STORM_INFO_FILE_SUPPORT
STORM_[SA]_GRIDFTP_SUPPORT Enable the corresponding protocol. Optional variable. Default value: STORM_INFO_GRIDFTP_SUPPORT
STORM_[SA]_RFIO_SUPPORT Enable the corresponding protocol. Optional variable. Default value: STORM_INFO_RFIO_SUPPORT
STORM_[SA]_ROOT_SUPPORT Enable the corresponding protocol. Optional variable. Default value: STORM_INFO_ROOT_SUPPORT
STORM_[SA]_HTTP_SUPPORT Enable the corresponding protocol. Optional variable. Default value: STORM_INFO_HTTP_SUPPORT
STORM_[SA]_HTTPS_SUPPORT Enable the corresponding protocol. Optional variable. Default value: STORM_INFO_HTTPS_SUPPORT
STORM_[SA]_FSTYPE See STORM_[SA]_FSTYPE definition. Optional variable. Available values: posixfs, gpfs. Default value: STORM_FSTYPE
STORM_[SA]_GRIDFTP_POOL_LIST See STORM_GRIDFTP_POOL_LIST definition. Optional variable. Default value: STORM_GRIDFTP_POOL_LIST
STORM_[SA]_GRIDFTP_POOL_STRATEGY See STORM_GRIDFTP_POOL_STRATEGY definition. Optional variable. Default value: STORM_GRIDFTP_POOL_STRATEGY
STORM_[SA]_ONLINE_SIZE Total size assigned to the Storage Area Expressed in GB. Must be an integer value. Mandatory.
STORM_[SA]_USED_ONLINE_SIZE Storage space currently used in the Storage Area expressed in Bytes. Must be an integer value. Used by YAIM to populate used-space.ini file.
STORM_[SA]_QUOTA Enables the quota management for the Storage Area and it works only on GPFS filesystem. Optional variable. Available values: true, false. Default value: false
STORM_[SA]_QUOTA_DEVICE GPFS device on which the quota is enabled. It is mandatory if STORM_[SA]_QUOTA variable is set. No default value.
STORM_[SA]_QUOTA_USER GPFS quota scope. Only one of the following three will be used (the first one with the highest priority in this order: USER, then GROUP, then FILESET). Optional variable. No default value.
STORM_[SA]_QUOTA_GROUP GPFS quota scope. Only one of the following three will be used (the first one with the highest priority in this order: USER, then GROUP, then FILESET). Optional variable. No default value.
STORM_[SA]_QUOTA_FILESET GPFS quota scope. Only one of the following three will be used (the first one with the highest priority in this order: USER, then GROUP, then FILESET). Optional variable. No default value.
STORM_[SA]_RFIO_HOST See STORM_RFIO_HOST definition. Optional variable. Default value: STORM_RFIO_HOST
STORM_[SA]_ROOT Physical storage path for the VO. Optional variable. Default value: STORM_DEFAULT_ROOT/SA
STORM_[SA]_ROOT_HOST See STORM_ROOT_HOST definition. Optional variable. Default value: STORM_ROOT_HOST
STORM_[SA]_SIZE_LIMIT See STORM_SIZE_LIMIT definition. Default value: STORM_SIZE_LIMIT
STORM_[SA]_STORAGECLASS See STORM_STORAGECLASS definition. Available values: T0D1, T1D0, T1D1, null. No default value.
STORM_[SA]_TOKEN Storage Area token, e.g: LHCb_RAW, INFNGRID_DISK. No default value.

Table 4: Storage Area Variables.

StoRM WebDAV variables  

The StoRM WebDAV service replaces the StoRM GridHTTPS service. To learn how to configure it refer to the StoRM WebDAV service installation and configuration guide.

Launching YAIM  

After having built the site-info.def file, you can configure the needed profile by using YAIM as follows:

/opt/glite/yaim/bin/yaim -c -d 6 -s <site-info.def> -n <profile-name>

But if in your StoRM deployment scenario more than a StoRM service has been installed on a single host you have to provide a single site-info.def services file containing all the required YAIM variables. Then you can configure all service profiles at once with a single YAIM call:

/opt/glite/yaim/bin/yaim -c -d 6 -s siteinfo.def -n se_storm_backend se_storm_frontend se_storm_gridftp se_storm_webdav

NOTE: if you are configuring on the same host profiles se_storm_backend and se_storm_frontend, you have to specify those profiles in this order to YAIM. This is also the case of profiles se_storm_backend and se_storm_webdav.

In case of a distributed deployment, on every host that run almost one of the StoRM components, you have to run YAIM specifying only the profiles of the installed components.

To check StoRM services status run:

service storm-backend-server status
service storm-frontend-server status
service storm-globus-gridftp status
service storm-webdav status

Advanced Configuration  

Please note that most of the configuration parameters of StoRM can be automatically managed directly by YAIM. This means that for standard installation in WLCG site without special requirement is not needed a manual editing of StoRM configuration file, but only a proper tuning of StoRM YAIM variables. On the other hand, with this guide we would like to give to site administrators the opportunity to learn about StoRM details and internal behaviours, in order to allow advanced configuration and ad-hoc set up, to optimize performance and results.

StoRM Frontend service  

The Frontend component relies on a single configuration file that contains all the configurable parameters. This file is:

/etc/storm/frontend-server/storm-frontend-server.conf

containing a list of:

key = value

pairs that can be used to configure the Frontend server.

Important

In case a parameter is modified, the Frontend service has to be restarted in order to read the new value.

Currently, the Frontend’s configuration parameters can be divided per section as follows.

Database settings

Property Name Description
db.host Host for database connection. Default is localhost
db.user User for database connection. Default is storm
db.passwd Password for database connection. Default is password

Service settings

Property Name Description
fe.port Frontend service port. Default is 8444
fe.threadpool.threads.number Size of the worker thread pool. Default is 50
fe.threadpool.maxpending Size of the internal queue used to maintain SRM tasks in case there are no free worker threads. Default is 200
fe.gsoap.maxpending Size of the GSOAP queue used to maintain pending SRM requests. Default is 2000

Log settings

Property Name Description
log.filename Full log file name path.
Default is /var/log/storm/storm-frontend.log
log.debuglevel Logging level. Possible values are: ERROR, WARN, INFO, DEBUG, DEBUG2. Default is INFO

Monitoring settings

Property Name Description
monitoring.enabled Enable/disable monitoring. Default is true.
monitoring.timeInterval Time interval in seconds between each monitoring round. Default is 60.
monitoring.detailed Enable/disable detailed monitoring. Default is false.

XML-RPC communication settings

Property Name Description
be.xmlrpc.host Backend hostname. Default is localhost.
be.xmlrpc.port Backend XML-RPC server port. Default is 8080.
be.xmlrpc.token Token used for communicating with Backend service. Mandatory, has no default.
be.xmlrpc.path XML-RPC server path. Default is /RPC2.
be.xmlrpc.check.ascii Enable/disable ASCII checking on strings to be sent via XML-RPC. Default is true.

REST communication settings

Property Name Description
be.recalltable.port REST server port running on the Backend machine. Default is 9998.

Blacklisting settings

Property Name Description
check.user.blacklisting Enable/disable user blacklisting. Default is false.
argus-pepd-endpoint The complete service endpoint of Argus PEP server. Mandatory if check.user.blacklisting is true.
Example: https://argus-pep-host:8154/authz

Proxy settings

Property Name Description
proxy.dir Directory used by the Frontend to save proxies files in case of requests with delegation. Default is /var/tmp/storm/proxy
proxy.user Local user owner of proxies files. This have to be the same local user running the Backend service. Mandatory.
security.enable.vomscheck Flag to enable/disable checking proxy VOMS credentials. Default is true.
security.enable.mapping Flag to enable/disable DN-to-userid mapping via gridmap-file. Default is false.

General settings

Property Name Description
wsdl.file WSDL file, complete with path, to be returned in case of GET request.

StoRM Backend service  

The Backend is the core of StoRM. It executes all SRM requests, interacts with other Grid service, with database to retrieve SRM requests, with file-system to set up space and file, etc. It has a modular architecture made by several internal components. The Backend needs to be configured for two main aspects:

  • service information: this section contains all the parameter regarding the StoRM service details. It relies on the storm.properties configuration file.
  • storage information: this section contains all the information regarding Storage Area and other storage details. It relies on the namespace.xml file.

Both storm.properties and namespace.xml configuration file default location is:

/etc/storm/backend-server

The storm.properties configuration file contains a list of:

key = value

pairs that represent all the information needed to configure the StoRM Backend service. The most important (and mandatory) parameters are configured by default trough YAIM with a standard installation of StoRM. All the other parameters are optionals and can be used to make advanced tuning of the Backend. To change/set a new value, or add a new parameter, just edit the storm.properties file and restart the Backend daemon. When the BackEnd starts, it writes into the log file the whole set of parameters read from the configuration file.

The namespace.xml configuration file contains the storage area info like what is needed to perform the mapping functionality, the storage area capabilities, which are the access and transfer protocols supported, etc..

Service information

Property Name Description
storm.service.SURL.endpoint List of comma separated strings identifying the StoRM Frontend endpoint(s). This is used by StoRM to understand if a SURL is local. E.g. srm://storm.cnaf.infn.it:8444/srm/managerv2.
If you want to accept SURL with the ip address instead of the FQDN hostname you have to add the proper endpoint (E.g. IPv4: srm://192.168.100.12:8444/srm/managerv2 or IPv6: srm://[2001:0db8::1428:57ab]:8444/srm/managerv2. Default value: srm://storm.service.FE-public.hostname:8444/srm/managerv2
storm.service.port SRM service port. Default: 8444
storm.service.SURL.default-ports List of comma separated valid SURL port numbers. Default: 8444
storm.service.FE-public.hostname StoRM Frontend hostname in case of a single Frontend StoRM deployment, StoRM Frontends DNS alias in case of a multiple Frontends StoRM deployment.
storm.service.FE-list.hostnames Comma separated list os Frontend(s) hostname(s). Default: localhost
storm.service.FE-list.IPs Comma separated list os Frontend(s) IP(s). E.g. 131.154.5.127, 131.154.5.128. Default: 127.0.0.1
proxy.home Directory used to contains delegated proxies used in case of srmCopy request. Please note that in case of clustered installation this directory have to be shared between the Backend and the Frontend(s) machines. Default: /etc/storm/tmp
pinLifetime.default Default PinLifetime in seconds used for pinning files in case of srmPrepareToPut or srmPrepareToGet operation without any pinLifetime specified. Default: 259200
pinLifetime.maximum Maximum PinLifetime allowed in seconds.
Default: 1814400
fileLifetime.default Default FileLifetime in seconds used for VOLATILE file in case of SRM request without FileLifetime parameter specified. Default: 3600
extraslashes.gsiftp Add extra slashes after the “authority” part of a TURL for gsiftp protocol.
extraslashes.rfio Add extra slashes after the “authority” part of a TURL for rfio protocol.
extraslashes.root Add extra slashes after the “authority” part of a TURL for root protocol.
extraslashes.file Add extra slashes after the “authority” part of a TURL for file protocol.
synchcall.directoryManager.maxLsEntry Maximum number of entries returned by an srmLs call. Since in case of recursive srmLs results can be in order of million, this prevent a server overload. Default: 500
directory.automatic-creation Flag to enable automatic missing directory creation upon srmPrepareToPut requests.
Default: false
directory.writeperm Flag to enable directory write permission setting upon srmMkDir requests on created directories. Default: false
default.overwrite Default file overwrite mode to use upon srmPrepareToPut and srmCopy requests. Default: A. Possible values are: N, A, D. Please note that N stands for Never, A stands for Always and D stands for When files differs.
default.storagetype Default File Storage Type to be used for srmPrepareToPut and srmCopy requests in case is not provided in the request. Default: V. Possible values are: V, P, D. Please note that V stands for Volatile, P stands for Permanent and D stands for Durable.

Requests garbage collector

The request garbage collector process cleans database from the expired asynchronous SRM requests. The value of expired.request.time defines how many seconds are necessary to a request, after its submission, to be considered expired. An appropriate tuning is needed in case of high throughput of SRM requests required for long time.

Property Name Description
purging Enable the request garbage collector. Default: true. Possible values are: true, false.
purge.interval Time interval in seconds between successive purging run. Default: 600.
purge.size Number of requests picked up for cleaning from the requests garbage collector at each run. This value is use also by Tape Recall Garbage Collector. Default: 800
purge.delay Initial delay before starting the requests garbage collection process, in seconds. Default: 10
expired.request.time Time in seconds to consider a request expired after its submission. Default: 21600 seconds (6h)

Expired put requests agent

This agent transits ongoing srmPtP to SRM_FILE_LIFETIME_EXPIRED if the request pin-lifetime is expired (see pinLifetime.default variable into Service Information section). The agent runs each transit.interval seconds and updates all the expired requests.

Property Name Description
transit.interval Time interval in seconds between successive agent run. Default: 3000.
transit.delay Initial delay before starting the agent process, in seconds. Default: 60

Garbage collector

Property Name Description
gc.pinnedfiles.cleaning.delay Initial delay before starting the reserved space, JIT ACLs and pinned files garbage collection process, in seconds. Default: 10
gc.pinnedfiles.cleaning.interval Time interval in seconds between successive purging run. Default: 300

Synchronous call

Property Name Description
synchcall.xmlrpc.unsecureServerPort Port to listen on for incoming XML-RPC connections from Frontends(s). Default: 8080
synchcall.xmlrpc.maxthread Number of threads managing XML-RPC connection from Frontends(s). A well sized value for this parameter have to be at least equal to the sum of the number of working threads in all FrontEend(s). Default: 100
synchcall.xmlrpc.token.enabled Whether the backend will require a token to be present for accepting XML-RPC requests. Default: true
synchcall.xmlrpc.token The token that the backend will require to be present for accepting XML-RPC requests. Mandatory if synchcall.xmlrpc.token.enabled is true

REST interface parameters

Property Name Description
storm.rest.services.port REST services port. Default: 9998

Database connection parameters

Property Name Description
com.mysql.jdbc.Driver JDBC driver to be used to connect with StoRM database. Default: com.mysql.jdbc.Driver
storm.service.request-db.protocol Protocol to be used to connect with StoRM database. Default: jdbc:mysql://
storm.service.request-db.host Host for StoRM database. Default: localhost
storm.service.request-db.db-name Database name for SRM requests. Default: storm_db
storm.service.request-db.username Username for database connection. Default: storm
storm.service.request-db.passwd Password for database connection
asynch.db.ReconnectPeriod Database connection refresh time intervall in seconds. Default: 18000
asynch.db.DelayPeriod Database connection refresh initial delay in seconds. Default: 30
persistence.internal-db.connection-pool Enable the database connection pool. Default: false
persistence.internal-db.connection-pool.maxActive Database connection pool max active connections. Default: 10
persistence.internal-db.connection-pool.maxWait Database connection pool max wait time to provide a connection. Default: 50

SRM Requests Picker

Property Name Description
asynch.PickingInitialDelay Initial delay before starting to pick requests from the DB, in seconds. Default: 1
asynch.PickingTimeInterval Polling interval in seconds to pick up new SRM requests. Default: 2
asynch.PickingMaxBatchSize Maximum number of requests picked up at each polling time. Default: 100
scheduler.serial DEPRECATED Flag to enable the execution of all the request on a single thread. Default: false

Worker threads

Property Name Description
scheduler.crusher.workerCorePoolSize Crusher Scheduler worker pool base size. Default: 10
scheduler.crusher.workerMaxPoolSize Crusher Schedule worker pool max size. Default: 50
scheduler.crusher.queueSize Request queue maximum size.
Default: 2000
scheduler.chunksched.ptg.workerCorePoolSize PrepareToGet worker pool base size. Default: 50
scheduler.chunksched.ptg.workerMaxPoolSize PrepareToGet worker pool max size. Default: 200
scheduler.chunksched.ptg.queueSize PrepareToGet request queue maximum size. Default: 2000
scheduler.chunksched.ptp.workerCorePoolSize PrepareToPut worker pool base size. Default: 50
scheduler.chunksched.ptp.workerMaxPoolSize PrepareToPut worker pool max size. Default: 200
scheduler.chunksched.ptp.queueSize PrepareToPut request queue maximum size. Default: 1000
scheduler.chunksched.bol.workerCorePoolSize BringOnline worker pool base size. Default: 50
scheduler.chunksched.bol.workerMaxPoolSize BringOnline Worker pool max size. Default: 200
scheduler.chunksched.bol.queueSize BringOnline request queue maximum size. Default: 2000
scheduler.chunksched.copy.workerCorePoolSize Copy worker pool base size. Default: 10
scheduler.chunksched.copy.workerMaxPoolSize Copy worker pool max size. Default: 50
scheduler.chunksched.copy.queueSize Copy request queue maximum size. Default: 500

HTTP(S) protocol

Property Name Description
gridhttps.enabled Flag to enable the support to HTTP and HTTPS protocols. Default: false

Protocol balancing

Property Name Description
gridftp-pool.status-check.timeout Time in milliseconds after which the status of a GridFTP has to be verified. Default: 20000 (20 secs)

Tape recall

Property Name Description
tape.support.enabled Flag to enable tape support. Default: false
tape.buffer.group.read System group to be assigned to files migrated from tape storage. Default: storm-SA-read
tape.buffer.group.write System group to be assigned to files migrated to tape storage. Default: storm-SA-write

Storage information: namespace.xml

Information about storage managed by StoRM is stored in a configuration file named namespace.xml located at /etc/storm/backend-server/ on StoRM Backend host. One of the information stored into namespace.xml file is what is needed to perform the mapping functionality. The mapping functionality is the process of retrieving or building the transport URL (TURL) of a file addressed by a Site URL (SURL) together with grid user credential. The Fig 3 shows the different schema of SURL and TURL.

Fig. 3: Site URL and Transfer URL schema.

A couple of quick concepts from SRM:

  • The SURL is the logical identifier for a local data entity
  • Data access and data transfer are made through the TURLs
  • The TURL identify a physical location of a replica
  • SRM services retrieve the TURL from a namespace database (like DPNS component in DPM) or build it through other mechanisms (like StoRM)

In StoRM, the mapping functionality is provided by the namespace component (NS).

  • The Namespace component works without a database.
  • The Namespace component is based on an XML configuration.
  • It relies on the physical storage structure.

The basic features of the namespace component are:

  • The configuration is modular and structured (representation is based on XML)
  • An efficient structure of namespace configuration lives in memory.
  • No access to disk or database is performed
  • The loading and the parsing of the configuration file occurs:
    • at start-up of the back-end service
    • when configuration file is modified

StoRM is different from the other solution, where typically, for every SRM request a query to the data base have to be done in order to establish the physical location of file and build the correct transfer URL. The namespace functions relies on two kind of parameters for mapping operations derived from the SRM requests, that are:

  • the grid user credential (a subject or a service acting on behalf of the subject)
  • the SURL

The Fig.4 shows the main concepts of Namespace Component:

  • NS-Filesystem: is the representation of a Storage Area
  • Mapping rule: represents the basic rule for the mapping functionalities
  • Approachable rule: represents the coarse grain access control to the Storage Area.

Fig. 4: Namespace structure.

This is and example of the FS element:

    <filesystem name="dteam-FS" fs_type="ext3">
        <space-token-description>DTEAM_TOKEN</space-token-description>
        <root>/storage/dteam</root>
        <filesystem-driver>
            it.grid.storm.filesystem.swig.posixfs
        </filesystem-driver>
        <spacesystem-driver>
            it.grid.storm.filesystem.MockSpaceSystem
        </spacesystem-driver>
        <storage-area-authz>
            <fixed>permit-all</fixed>
        </storage-area-authz>
        <properties>
            <RetentionPolicy>replica</RetentionPolicy>
            <AccessLatency>online</AccessLatency>
            <ExpirationMode>neverExpire</ExpirationMode>
            <TotalOnlineSize unit="GB" limited-size="true">291</TotalOnlineSize>
            <TotalNearlineSize unit="GB">0</TotalNearlineSize>
        </properties>
        <capabilities>
            <aclMode>AoT</aclMode>
            <default-acl>
                <acl-entry>
                    <groupName>lhcb</groupName>
                    <permissions>RW</permissions>
                </acl-entry>
            </default-acl>
            <trans-prot>
                <prot name="file">
                    <schema>file</schema>
                </prot>
                <prot name="gsiftp">
                    <id>0</id>
                    <schema>gsiftp</schema>
                    <host>gsiftp-dteam-01.cnaf.infn.it</host>
                    <port>2811</port>
                </prot>
                <prot name="gsiftp">
                    <id>1</id>
                    <schema>gsiftp</schema>
                    <host>gsiftp-dteam-02.cnaf.infn.it</host>
                    <port>2811</port>
                </prot>
                <prot name="rfio">
                    <schema>rfio</schema>
                    <host>rfio-dteam.cnaf.infn.it</host>
                    <port>5001</port>
                </prot>
                <prot name="root">
                    <schema>root</schema>
                    <host>root-dteam.cnaf.infn.it</host>
                    <port>1094</port>
                </prot>
            </trans-prot>
            <pool>
                <balance-strategy>round-robin</balance-strategy>
                <members>
                    <member member-id="0"></member>
                    <member member-id="1"></member>
                </members>
            </pool>
        </capabilities>
        <defaults-values>
            <space lifetime="86400" type="volatile" guarsize="291"
                totalsize="291"/>
            <file lifetime="3600" type="volatile"/>
        </defaults-values>
    </filesystem>

Attributes meaning:

  • <filesystem name="dteam-FS" fs_type="ext3"> : The name is the element identifier. It identifies this Storage Area in the namespace domains. The fs_type is the type of the filesystem the Storage Area is built on. Possible values are: ext3, gpfs. Please note that ext3 stands for all generic POSIX filesystem (ext3, Lustre, etc.)
  • <space-token-description>DTEAM_TOKEN</space-token-description> : Storage Area space token description.
  • <root>/storage/dteam</root> : Physical root directory of the Storage Area on the file system.
  • <filesystem-driver>it.grid.storm.filesystem.swig.posixfs</filesystem-driver> : Driver loaded by the Backend for filesystem interaction. This driver is used mainly to set up ACLs on space and files.
  • <spacesystem-driver>it.grid.storm.filesystem.MockSpaceSystem</spacesystem-driver> Driver loaded by the Backend for filesystem interaction. This is driver is used to manage space allocation. (E.g. on GPFS it uses the gpfs_prealloc() call).

Storage Area properties

    <properties>
        <RetentionPolicy>replica</RetentionPolicy>
        <AccessLatency>online</AccessLatency>
        <ExpirationMode>neverExpire</ExpirationMode>
        <TotalOnlineSize unit="GB" limited-size="true">291</TotalOnlineSize>
        <TotalNearlineSize unit="GB">0</TotalNearlineSize>
    </properties>

in details:

  • <RetentionPolicy>replica</RetentionPolicy> : Retention Policy of the Storage Area. Possible values are: replica, custodial.
  • <AccessLatency>online</AccessLatency> : Access Latency of the Storage Area. Possible values: online, nearline.
  • <ExpirationMode>neverExpire</ExpirationMode> : Expiration Mode of the Storage Area. Deprecated.
  • <TotalOnlineSize unit="GB" limited-size="true">291</TotalOnlineSize> Total on-line size of the Storage Area in GigaBytes. In case the attribute limited-size=”true”, StoRM enforce this limit at SRM level. When the space used for the Storage Area is at least equal to the size specified, every further SRM request to write files will fail with SRM_NO_FREE_SPACE error code.
  • <TotalNearlineSize unit="GB">0</TotalNearlineSize> : Total near-line size of the Storage Area. This only means in case the Storage Area is in some way attached to a MSS storage system (such as TSM with GPFS).

Storage area capabilities:

    <aclMode>AoT</aclMode>

This is the ACL enforcing approach. Possible values are: AoT, JiT. In case of AheadOfTime(AoT) approach StoRM sets up a physical ACL on file and directories for the local group (gid) in which the user is mapped. (The mapping is done querying the LCMAPS service con the BE machine passing both user DN and FQANs). The group ACL remains for the whole lifetime of the file. In case of JustInTime(JiT) approach StoRM sets up and ACL for the local user (uid) the user is mapped. The ACL remains in place only for the lifetime of the SRM request, then StoRM removes it. (This is to avoid to grant access to pool account uid in case of reallocation on different users.)

    <default-acl>
        <acl-entry>
            <groupName>lhcb</groupName>
            <permissions>RW</permissions>
        </acl-entry>
    </default-acl>

This is the Default ACL list. A list of ACL entry (that specify a local user (uid) or group id (gid) and a permission (R,W,RW). This ACL are automatically by StoRM at each read or write request. Useful for use cases where experiment want to allow local access to file on group different than the one that made the SRM request operation.

Access and Transfer protocol supported

The file protocol:

    <prot name="file">
        <schema>file</schema>
    </prot>

The file protocol means the capability to perform local access on file and directory. If user performs an SRM request (srmPtG or srmPtP) specifying the file protocol, and it is supported by the selected Storage Area, StoRM return a TURL structured as:

file:///atlas/atlasmcdisk/filename

This TURL can be used through GFAL or other SRM clients to perform a direct access on the file.

    <prot name="gsiftp">
        <id>0</id>
        <schema>gsiftp</schema>
        <host>gridftp-dteam.cnaf.infn.it</host>
        <port>2811</port>
    </prot>

The gsiftp protocol:

The gsiftp protocol means the GridFTP transfer system from Globus widely adopted in many Grid environments. This capability element contains all the information about the GridFTP server to use with this Storage Area. Site administrator can decide to have different server (or pools of server) for different Storage Areas. The id is the server identifier to be used when defining a pool. The schema have to be gsiftp. host is the hostname of the server (or the DNS alias used to aggregate more than one server). The port is the GridFTP server port, typically 2811. If user performs an SRM request (srmPtG or srmPtP) specifying the gsiftp protocol, and it is supported by the selected Storage Area, StoRM return a TURL structured as:

gsiftp://gridftp-dteam.cnaf.infn.it:2811/atlas/atlasmcdisk/filename.

The rfio protocol:

    <prot name="rfio">
        <schema>rfio</schema>
        <host>rfio-dteam.cnaf.infn.it</host>
        <port>5001</port>
    </prot>

This capability element contains all the information about the rfio server to use with this Storage Area. Like for GridFTP, site administrator can decide to have different server (or pools of server) for different Storage Areas. The id is the server identifier. The schema have to be rfio. host is the hostname of the server (or the DNS alias used to aggregate more than one server). The port is the rfio server port, typically 2811. If user performs an SRM request (srmPtG or srmPtP) specifying the rfio protocol, and it is supported by the selected Storage Area, StoRM return a TURL structured as:

rfio://rfio-dteam.cnaf.infn.it:5001/atlas/atlasmcdisk/filename.

The root protocol:

    <prot name="root">
        <schema>root</schema>
        <host>root-dteam.cnaf.infn.it</host>
        <port>1094</port>
    </prot>

This capability element contains all the information about the root server to use with this Storage Area. Like for other protocols, site administrator can decide to have different server (or pools of server) for different Storage Areas. The id is the server identifier. The schema have to be root. host is the hostname of the server (or the DNS alias used to aggregate more than one server). The port is the root server port, typically 1094. If user performs an SRM request (srmPtG or srmPtP) specifying the root protocol, and it is supported by the selected Storage Area, StoRM return a TURL structured as:

root://root-dteam.cnaf.infn.it:1094/atlas/atlasmcdisk/filename.

Pool of protocol servers

    <pool>
        <balance-strategy>round-robin</balance-strategy>
        <members>
            <member member-id="0"></member>
            <member member-id="1"></member>
        </members>
    </pool>

Here is defined a pool of protocol servers. Within the pool element pool members are declared identified by their id, the list of members have to be homogenious with respect to their schema. This id is the server identifier specified in the prot element. The balance-strategy represent the load balancing strategy with which the pool has to be managed. Possible values are: round-robin, smart-rr, random and weight.
NOTE: Protocol server pooling is currently available only for gsiftp servers.
Load balancing strategies details:

  • round-robin At each TURL construction request the strategy returns the next server following the round-robin approach: a circular list with an index starting from the head and incrementd at each request.

  • smart-rr An enhanced version of round-robin. The status of pool members is monitored and maintained in a cache. Cache entries has a validity life time that is refreshed when expired. If the member chosen by round-robin is marked as not responsive another iteration of round-robin is performed.

  • random At each TURL construction request the strategy returns a random member of the pool.

  • weight An enhanced version of round-robin. When a server is chosen the list index will not be moved forward (and the server will be choosen again in next request) for as many times as specified in its weight.

NOTE: The weight has to be specified in a weight element inside the member element:

    <pool>
        <balance-strategy>WEIGHT</balance-strategy>
        <members>
            <member member-id="0">
                <weight>5</weight>
            </member>
            <member member-id="1">
                <weight>1</weight>
            </member>
        </members>
    </pool>

Default values

    <defaults-values>
        <space lifetime="86400" type="volatile" guarsize="291" totalsize="291"/>
        <file lifetime="3600" type="volatile"/>
    </defaults-values>

Mapping rules

A mapping rule define how a certain NS-Filesystem, that correspond to a Storage Area in SRM meaning of terms, is exposed in Grid:

    <mapping-rules>
        <map-rule name="dteam-maprule">
            <stfn-root>/dteam</stfn-root>
            <mapped-fs>dteam-FS</mapped-fs>
        </map-rule>
    </mapping-rules>

The <stfn-root> is the path used to build SURL referring to that Storage Area. The mapping rule above define that the NS-Filesystem named dteam-FS has to be mapped in the /dteam SURL path. Following the NS-Filesystem element defined in the previous section, the SURL:

srm://storm-fe.cr.cnaf.infn.it:8444/dteam/testfile

following the root expressed in the dteam-FS NF-Filesystem element, is mapped in the physical root path on the file system:

/storage/dteam

This approach works similar to an alias, from the SURL stfn-root path to the NS-Filesystem root.

Approachable rules

Approachable rules defines which users (or which class of users) can approach a certain Storage Area, always expressed as NS-Filesystem element. If a user can approach a Storage Area, he can use it for all SRM operations. If a user is not allowed to approach a Storage Area, and he try to specify it in any SRM request, he will receive an SRM_INVALID_PATH. In practics, if a user cannot approach a Storage Area, for him that specific path does not exists at all. Here is an example of approachable rule for the dteam-FS element:

    <approachable-rules>
        <app-rule name="dteam-rule">
            <subjects>
                <dn>*</dn>
                <vo-name>dteam</vo-name>
            </subjects>
            <approachable-fs>dteam-FS</approachable-fs>
            <space-rel-path>/</space-rel-path>
        </app-rule>
    </approachable-rules>
  • <dn>*</dn> means that everybody can access the storage Area. Here you can define regular expression on DN fields to define more complex approachable rules.

  • <vo-name>dteam</vo-name> means that only users belonging to the VO dteam will be allowed to access the Storage Area. This entry can be a list of comma separeted VO-name.

Used space initialization

An administrator can initialize the status of a Storage Area by editing a configuration file, the used-space.ini configuration file, that it’s parsed once at Backend’s bootstrap time. See this configuration example for more info.

StoRM GridFTP service  

At each transfer request, the GridFTP uses LCMAPS to get user mapping and start a new processes on behalf of the user to proceed with data transfer. GridFTP relies on a different db file to get the plugin to use. Obviously LCMAPS has to answer to GridFTP requests and StoRM requests in coeherent way. The GridFTP uses the LCMAPS configuration file located at /etc/lcmaps/lcmaps.db.

Enable checksum

To enable checksum calculation on the fly, the following parameter needs to be enabled into the GridFTP host’s site-info.def:

GRIDFTP_WITH_DSI="yes"

If all works, during transfers you should see -dsi StoRM -allowed-modules StoRM as option for each globus-gridftp-server execution:

$ ps -ax | grep globus-gridftp-server
/usr/sbin/globus-gridftp-server -p 2811 -d error,warn,info -l /var/log/storm/storm-gridftp-session.log -Z /var/log/storm/storm-globus-gridftp.log -dsi StoRM -allowed-modules StoRM -no-detach -config-base-path / -inetd -config-base-path /

IPC Channel

The IPC channel is used between a Globus GridFTP server head node and its disk servers, e.g. for striped transfers (read more into the GridFTP System Administrator’s Guide). In the default behavior of StoRM deployment the IPC channel is not used. In fact, StoRM is mainly installed on a single host with one gridftp server which read/write directly on disk. In the cases it is a distributed deployment, there are usually n gridftp servers which read/write data directly on disk, behind a haproxy or a dns for example, so there are no separate frontends and one or more disk node servers. However, it’s important to know that the IPC channel must be kept firewalled for any hosts outside the SE system.

Important

The IPC channel must be kept firewalled for any hosts outside the SE system.

Logging  

This section is dedicated to all the log information provided by all the StoRM services. By default, all the log files are saved into /var/log/storm directory.

StoRM Frontend Logging  

The Frontend logs information on the service status and the SRM requests received and managed by the process. The Frontend’s log supports different level of logging (ERROR, WARNING, INFO, DEBUG, DEBUG2) that can be set from the dedicated parameter in storm-frontend-server.conf configuration file. The Frontend log file named storm-frontend-server.log is placed in the /var/log/storm directory. At start-up time, the FE prints here the whole set of configuration parameters, this can be useful to check desired values. When a new SRM request is managed, the FE logs information about the user (DN and FQANs) and the requested parameters. At each SRM request, the FE logs also this important information:

03/19 11:51:42 0x88d4ab8 main: AUDIT - Active tasks: 3
03/19 11:51:42 0x88d4ab8 main: AUDIT - Pending tasks: 0

about the status of the worker pool threads and the pending process queue. Active tasks is the number of worker threads actually running. Pending tasks is the number of SRM requests queued in the worker pool queue. These data gives important information about the Frontend load.

monitoring.log

Monitoring service, if enabled, provides information about the operations executed in a certain amount of time writing them on file /var/log/storm/monitoring.log. This amount of time (called Monitoring Round) is configurable via the configuration property monitoring.timeInterval; its default value is 1 minute. At each Monitoring Round, a single row is printed on log. This row reports both information about requests that have been performed in the last Monitoring Round and information considering the whole FE execution time (Aggregate Monitoring). Informations reported are generated from both Synchronous and Asynchronous requests and tell the user:

  • how many requests have been performed in the last Monitoring Round,
  • how many of them were successful,
  • how many failed,
  • how many produced an error,
  • the average execution time,
  • the minimum execution time,
  • the maximum execution time.

This row reports the Monitoring Summary and this is the default behavior of the monitoring service.

Example:

03/20 14:19:11 : [# 22927 lifetime=95:33:18] S [OK:47,F:15,E:0,m:0.085,M:3.623,Avg:0.201] A [OK:16,F:0,E:0,m:0.082,M:0.415,Avg:0.136]
  Last:(S [OK:12,F:5,E:0,m:0.091,M:0.255] A [OK:6,F:0,E:0,m:0.121,M:0.415])

Furthermore it can be requested a more detailed Frontend Monitoring activity by setting the configuration property monitoring.detailed to true. Doing this, at each Monitoring Round for each kind of SRM operation performed in the Monitoring Round (srmls, srmPtp, srmRm, …) the following information are printed in a section with header “Last round details:”:

  • how many request succeeded,
  • how many failed,
  • how many produced an error,
  • the average execution time,
  • the minimum execution time,
  • the maximum execution time,
  • the execution time standard deviation.

This is called the Detailed Monitoring Round. After this, the Monitoring Summary is printed. Then, considering the whole Frontend execution time, in a section with header “Details:”, a similar detailed summary is printed. This is called the Aggregate Detailed Monitoring.

Example:

03/20 14:19:11 : Last round details:
03/20 14:19:11 : [PTP] [OK:3,F:0,E:0,Avg:0.203,Std Dev:0.026,m:0.183,M:0.240]
03/20 14:19:11 : [Put done] [OK:2,F:0,E:0,Avg:0.155,Std Dev:0.018,m:0.136,M:0.173]
03/20 14:19:11 : [# 22927 lifetime=95:33:18] S [OK:47,F:15,E:0,m:0.085,M:3.623,Avg:0.201] A [OK:16,F:0,E:0,m:0.082,M:0.415,Avg:0.136]
  Last:(S [OK:12,F:5,E:0,m:0.091,M:0.255] A [OK:6,F:0,E:0,m:0.121,M:0.415])
03/20 14:19:11 : Details:
03/20 14:19:11 : [PTP] [OK:7,F:0,E:0,Avg:0.141,Std Dev:0.057,m:0.085,M:0.240]
03/20 14:19:11 : [Put done] [OK:5,F:0,E:0,Avg:0.152,Std Dev:0.027,m:0.110,M:0.185]
03/20 14:19:11 : [Release files] [OK:4,F:0,E:0,Avg:0.154,Std Dev:0.044,m:0.111,M:0.216]
03/20 14:19:11 : [Rm] [OK:3,F:0,E:0,Avg:0.116,Std Dev:0.004,m:0.111,M:0.122]

Note:

  • Operations not performed in current Monitoring Round are not printed in Detailed Monitoring Round.
  • Operations never performed are not printed in Aggregate Detailed Monitoring.
  • Operation performed in current Monitoring Round are aggregated in Aggregate Detailed Monitoring.

gSOAP tracefile

If you have problem at gSOAP level, and you have already looked at the troubleshooting section of the StoRM site without finding a solution, and you are brave enough, you could try to find some useful information on the gSOAP log file. To enable gSOAP logging, set the following environment variables:

$ export CGSI_TRACE=1
$ export CGSI_TRACEFILE=/tmp/tracefile

and restart the Frontend daemon by calling directly the init script /etc/init.d/storm-frontend-server and see if the error messages contained in /tmp/tracefile could help. Please be very careful, it prints really a huge amount of information.

StoRM Backend Logging  

The Backend log files provide information on the execution process of all SRM requests. All the Backend log files are placed in the /var/log/storm directory. Backend logging is based on logback framework. Logback provides a way to set the level of verbosity depending on the use case. The level supported are FATAL, ERROR, INFO, WARN, DEBUG.

The file

/etc/storm/backend-server/logging.xml

contains the following information:

<logger name="it.grid.storm" additivity="false">
    <level value="DEBUG" />
    <appender-ref ref="PROCESS" />
</logger>

the value can be set to the desired log level. Please be careful, because logging operations can impact on system performance (even 30% slower with DEBUG in the worst case). The suggest logging level for production endpoint is INFO. In case the log level is modified, the Backend has not to be restarted to read the new value.

StoRM Backend log files are the followings:

  • storm-backend.log, the main log file with each single request and errors are logged;
  • heartbeat.log, an aggregated log that shows the number of synch and asynch requests occoured from startup and on last minute;
  • storm-backend-metrics.log, a finer grained monitoring of incoming synchronous requests, contains metrics for individual types of synchronous requests.

storm-backend.log

The main Backend service log file is:

  • storm-backend.log. All the information about the SRM execution process, error or warning are logged here depending on the log level. At startup time, the BE logs here all the storm.properties value, this can be useful to check value effectively used by the system. After that, the BE logs the result of the namespace initialization, reporting errors or misconfiguration. At the INFO level, the BE logs for each SRM operation at least who have request the operation (DN and FQANs), on which files (SURLs) and the operation result. At DEBUG level, much more information are printed regarding the status of many StoRM internal component, depending on the SRM request type. DEBUG level has to be used carefully only for troubleshooting operation. If ERROR or FATAL level are used, the only event logged in the file are due to error condition.

heartbeat.log

StoRM provides a bookkeeping framework that elaborates informations on SRM requests processed by the system to provide user-friendly aggregated data that can be used to get a quick view on system health.

  • heartbeat.log. This useful file contains information on the SRM requests process by the system from its startup, adding new information at each beat. The beat time interval can be configured, by default is 60 seconds. At each beat, the heartbeat component logs an entry.

A heartbeat.log entry example:

    [#.....71 lifetime=1:10.01]
        Heap Free:59123488 SYNCH [500] ASynch [PTG:2450 PTP:3422]
        Last:( [#PTG=10 OK=10 M.Dur.=150] [#PTP=5 OK=5 M.Dur.=300] )
Log Meaning
#......71 Log entry number
lifetime=1:10.01 Lifetime from last startup, hh:mm:ss
Heap Free:59123488 BE Process free heap size in Bytes
SYNCH [500] Number of Synchronous SRM requests executed in the last beat
ASynch [PTG:2450 PTP:3422] Number of srmPrepareToGet and srmPrepareToPut requests executed from start-up.
Last:( [#PTG=10 OK=10 M.Dur.=150] Number of srmPrepareToGet executed in the last beat, with the number of request terminated with success (OK=10) and average time in millisecond (M.Dur.=150)
[#PTP=5 OK=5 M.Dur.=300] Number of srmPrepareToPut executed in the last beat, with number of request terminated with success and average time in milliseconds.

This log information can be really useful to gain a global view on the overall system status. A tail on this file is the first thing to do if you want to check the health of your StoRM installation. From here you can understand if the system is receiving SRM requests or if the system is overloaded by SRM request or if PtG and PtP are running without problem or if the interaction with the filesystem is exceptionally low (in case the M.Dur. is much more than usual).

storm-backend-metrics.log

A finer grained monitoring of incoming synchronous requests is provided by this log file. It contains metrics for individual types of synchronous requests.

A storm-backend-metrics.log entry example:

16:57:03.109 - synch.ls [(m1_count=286, count=21136) (max=123.98375399999999, min=4.299131, mean=9.130859862802883, p95=20.736006, p99=48.147704999999995) (m1_rate=4.469984951030006, mean_rate=0.07548032009470132)] duration_units=milliseconds, rate_units=events/second
Log Meaning
synch.ls Type of operation.
m1_count=286 Number of operation of the last minute.
count=21136 Number of operations from last startup.
max=123.98375399999999 Maximum duration of last bunch.
min=4.299131 Minimum duration of last bunch.
mean=9.130859862802883 Duration average of last bunch
p95=20.736006 The 95% of last bunch operations lasted less then 20.73ms
p99=48.147704999999995 The 99% of last bunch operations lasted less then 48.14ms

Here is the list of current logged operations:

Operation Description
synch Synch operations summary
synch.af Synch srmAbortFiles operations
synch.ar Synch srmAbortRequest operations
synch.bol Synch srmBringOnLine operations
synch.efl Synch srmExtendFileLifetime operations
synch.gsm Synch srmGetSpaceMetadata operations
synch.gst Synch srmGetSpaceToken operations
synch.ls Synch srmLs operations
synch.mkdir Synch srmMkDir operations
synch.mv Synch srmMv operations
synch.pd Synch srmPd operations
synch.ping Synch srmPing operations
synch.ptg Synch srmPtG operations
synch.ptp Synch srmPtP operations
synch.rf Synch srmRf operations
synch.rm Synch srmRm operations
synch.rmDir Synch srmRmDir operations
synch.releaseSpace Synch srmReleaseSpace operations
synch.reserveSpace Synch srmReserveSpace operations
synch.sPtg Synch srmStatusPrepareToGet operations
synch.sPtp Synch srmStatusPrepareToPut operations
fs.aclOp Acl set/unset on filesystem operations
fs.fileAttributeOp File attribute set/unset on filesystem operations
fs.fileChownOp File ownership operations
fs.fileOnDiskOp Is file on disk operations
fs.fileTruncateOp File truncate operations
fs.getFreeSpaceOp Get free space operations
ea Extended attributes operations

StoRM WebDAV Logging  

The service logs live in the /var/log/storm/webdav directory.

  • storm-webdav-server.log provides the main service log
  • storm-webdav-server-access.log provides an http access log
  • storm-webdav-server-metrics.log provides a metrics log, similar to the StoRM backend metrics.

GridFTP Logging  

GridFTP produce two separated log files:

  • /var/log/storm/gridftp-session.log for the command session information
  • /var/log/storm/globus-gridftp.log for the transfer logs

The logging level can be specified by editing the configuration file:

/etc/globus-gridftp-server/gridftp.gfork

The supported logging levels are: ERROR, WARN, INFO, DUMP and ALL.

Redirect LCMAPS logging

Administrators can redirect the LCMAPS logging to a different log file than the one used by syslog by setting the LLGT_LOG_FILE environment variable. As example, consider the following setup for the gridftp service:

vim /etc/sysconfig/globus-gridftp

insert:

export LLGT_LOG_FILE="/var/log/storm/storm-gridftp-lcmaps.log"

After restarting the service, all LCMAPS calls will be logged to the new file.

Information service  

The WLCG Information System is used to discover services and get status information about WLCG resources. The BDII (Berkeley Database Information Index) is a Perl/BDB ‘glue’ used to manage LDAP updates. See Grid Information System page for more details.

StoRM Info Provider  

StoRM Info Provider is the StoRM component that manages how and what information are published on the BDII. By default, the BDII uses three directories to obtain information sources:

  • ldif: static LDIF files should be placed in this directory;
  • provider: here information providers are placed and run once at BDII startup;
  • plugin: scripts periodically run to update information.

These directories are located by default into /var/lib/bdii/gip.

Configuration  

StoRM DIP has not a configuration file, its behavior and outputs depend on the site configuration which is processed by yaim-storm and stored into /etc/storm/info-provider/storm-yaim-variables.conf.

However, from StoRM DIP v1.7.7 a new YAIM variable has been introduced: STORM_GRIDHTTPS_PUBLIC_HOST.

Similar to the meaning of STORM_FRONTEND_PUBLIC_HOST, it represents the FQDN of the hostname where a webdav endpoint is installed, or the public FQDN name of the webdav endpoint hostname in case there’s a DNS load balancing, for example.

StoRM DIP will publish STORM_GRIDHTTPS_PUBLIC_HOST as a WebDAV endpoint only if STORM_GRIDHTTPS_ENABLED is true.

Usage  

/usr/libexec/storm-info-provider -h

usage: storm-info-provider [-h] [-v LOG_LEVEL] [-o LOG_FILENAME]
                       {configure,get-static-ldif,get-update-ldif} ...

Options:

  • -v: LOG_LEVEL can be 10 (DEBUG), 20 (INFO - default), 30 (WARNING) and 40 (ERROR)
  • -o: all the log messages are printed on stderr by default but they can be redirected to an external LOG_FILENAME by specifying this option

Example of usage with configure:

/usr/libexec/storm-info-provider configure -h

usage: storm-info-provider configure [-h] [-f FILEPATH]
                                 [-g {glue13,glue2,all}]
optional arguments:
  -h, --help            show this help message and exit
  -f FILEPATH
  -g {glue13,glue2,all}

Options:

  • -f: the path of the file which contains all the StoRM related YAIM variables with their key-value pairs (default is /etc/storm/info-provider/storm-yaim-variables.conf which is the file created by yaim-storm)
  • -g: GLUE version selector (default: all)

During configuration, yaim-storm creates storm-yaim-variables.conf and runs the StoRM Dynamic Info Provider script as follow:

/usr/libexec/storm-info-provider -v LOG_LEVEL configure -g all -f /etc/storm/info-provider/storm-yaim-variables.conf

Example of output with LOG_LEVEL=20:

/usr/libexec/storm-info-provider configure

2014-09-04 10:40:34,271 root        : INFO Successfully created /etc/storm/info-provider/glite-info-glue13-service-storm.conf !
2014-09-04 10:40:34,271 root        : INFO Successfully created /var/lib/bdii/gip/provider/storm-glue13-provider !
2014-09-04 10:40:34,272 root        : INFO Successfully created /var/lib/bdii/gip/plugin/storm-glue13-plugin !
2014-09-04 10:40:34,321 root        : INFO Successfully created /var/lib/bdii/gip/ldif/storm-glue13-static.ldif !
2014-09-04 10:40:34,322 root        : INFO Successfully created /etc/storm/info-provider/glite-info-glue2-service-storm.conf !
2014-09-04 10:40:34,322 root        : INFO Successfully created /etc/storm/info-provider/glite-info-glue2-service-storm-endpoint-srm.conf !
2014-09-04 10:40:34,322 root        : INFO Successfully created /var/lib/bdii/gip/provider/storm-glue2-provider !
2014-09-04 10:40:34,323 root        : INFO Successfully created /var/lib/bdii/gip/plugin/storm-glue2-plugin !
2014-09-04 10:40:34,365 root        : INFO Successfully created /var/lib/bdii/gip/ldif/storm-glue2-static.ldif !
2014-09-04 10:40:34,365 root        : INFO Received configure - It took 0.04 sec

Example of usage with get-static-ldif:

/usr/libexec/storm-info-provider get-static-ldif -h

usage: storm-info-provider get-static-ldif [-h] [-f FILEPATH]
                                           [-g {glue13,glue2}]
optional arguments:
  -h, --help         show this help message and exit
  -f FILEPATH
  -g {glue13,glue2}

Options:

  • -f: the path of the file which contains all the StoRM related YAIM variables with their key-value pairs (default is /etc/storm/info-provider/storm-yaim-variables.conf which is the file created by yaim-storm)
  • -g: GLUE version selector (default: glue2)

Example of a filtered output to obtain only the dn of the generated entries:

/usr/libexec/storm-info-provider get-static-ldif -g glue13 2>/dev/null | grep dn

dn: GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSALocalID=tape:custodial:nearline,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueVOInfoLocalID=testers.eu-emi.eu,GlueSALocalID=tape:custodial:nearline,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSALocalID=igi:replica:online,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSALocalID=noauth:replica:online,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSALocalID=nested:replica:online,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueVOInfoLocalID=testers.eu-emi.eu,GlueSALocalID=nested:replica:online,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSALocalID=dteam:replica:online,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueVOInfoLocalID=dteam,GlueSALocalID=dteam:replica:online,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSALocalID=testerseuemieu:replica:online,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueVOInfoLocalID=testers.eu-emi.eu,GlueSALocalID=testerseuemieu:replica:online,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSEControlProtocolLocalID=srm_v2.2,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSEAccessProtocolLocalID=file,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSEAccessProtocolLocalID=gsiftp,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSEAccessProtocolLocalID=xroot,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSEAccessProtocolLocalID=http,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSEAccessProtocolLocalID=https,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid
dn: GlueSEAccessProtocolLocalID=webdav,GlueSEUniqueID=cloud-vm45.cloud.cnaf.infn.it,mds-vo-name=resource,o=grid

The action get-static-ldif is not used by the installed scripts. However its functionality is internally used by the configure action to generate the static ldif files.

Example of usage with get-update-ldif:

/usr/libexec/storm-info-provider get-update-ldif -h
usage: storm-info-provider get-static-ldif [-h] [-f FILEPATH]
                                           [-g {glue13,glue2}]
optional arguments:
  -h, --help         show this help message and exit
  -f FILEPATH
  -g {glue13,glue2}

Options:

  • -f: the path of the file which contains all the StoRM related YAIM variables with their key-value pairs (default is /etc/storm/info-provider/storm-yaim-variables.conf which is the file created by yaim-storm)
  • -g: GLUE version selector (default: glue2)

The plugin files created during configure phase runs StoRM DIP get-update-ldif. If StoRM service is down, an error is logged and user obtains the LDIF output useful to update the serving-state value of the endpoints.

Example of a filtered output to obtain only the dn of the generated entries:

/usr/libexec/storm-info-provider get-update-ldif -g glue2 2>/dev/null | grep dn

dn: GLUE2EndpointID=cloud-vm45.cloud.cnaf.infn.it/storage/endpoint/SRM,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2EndpointID=cloud-vm45.cloud.cnaf.infn.it/storage/endpoint/HTTP,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2EndpointID=cloud-vm45.cloud.cnaf.infn.it/storage/endpoint/HTTPS,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2StorageServiceCapacityID=cloud-vm45.cloud.cnaf.infn.it/storage/capacity/online,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2StorageServiceCapacityID=cloud-vm45.cloud.cnaf.infn.it/storage/capacity/nearline,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/tape,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2StorageShareCapacityID=cloud-vm45.cloud.cnaf.infn.it/storage/share/tape/capacity/online,GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/tape,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2StorageShareCapacityID=cloud-vm45.cloud.cnaf.infn.it/storage/share/tape/capacity/nearline,GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/tape,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/igi,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2StorageShareCapacityID=cloud-vm45.cloud.cnaf.infn.it/storage/share/igi/capacity/online,GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/igi,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/noauth,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2StorageShareCapacityID=cloud-vm45.cloud.cnaf.infn.it/storage/share/noauth/capacity/online,GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/noauth,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/nested,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2StorageShareCapacityID=cloud-vm45.cloud.cnaf.infn.it/storage/share/nested/capacity/online,GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/nested,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/dteam,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2StorageShareCapacityID=cloud-vm45.cloud.cnaf.infn.it/storage/share/dteam/capacity/online,GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/dteam,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/testerseuemieu,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
dn: GLUE2StorageShareCapacityID=cloud-vm45.cloud.cnaf.infn.it/storage/share/testerseuemieu/capacity/online,GLUE2ShareID=cloud-vm45.cloud.cnaf.infn.it/storage/share/testerseuemieu,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue

Example of the output generated when StoRM service is down:

service storm-backend-server stop

Stopping storm-backend-server                              [  OK  ]

/usr/libexec/storm-info-provider get-update-ldif -g glue2 2>/dev/null

dn: GLUE2EndpointID=cloud-vm45.cloud.cnaf.infn.it/storage/endpoint/SRM,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
GLUE2EndpointServingState: closed
dn: GLUE2EndpointID=cloud-vm45.cloud.cnaf.infn.it/storage/endpoint/HTTP,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
GLUE2EndpointServingState: closed
dn: GLUE2EndpointID=cloud-vm45.cloud.cnaf.infn.it/storage/endpoint/HTTPS,GLUE2ServiceID=cloud-vm45.cloud.cnaf.infn.it/storage,GLUE2GroupID=resource,o=glue
GLUE2EndpointServingState: closed

CDMI StoRM  

Introduction  

CDMI StoRM is a plugin for the INDIGO DataCloud CDMI server in order to support StoRM as storage back-end and allow users to negotiate the Quality of Service of stored data through CDMI.

In short, through the CDMI server users/admins can:

  • read the status of a resource (access latency, number of replicas, size, etc..);
  • schedule, if allowed, a change of its related Quality of Service.

Currently, in StoRM use case, changing the QoS of a resource means recalling a file from tape.

Fig. 5: CDMI StoRM architecture overview.

Refer to the CDMI server user guide for all the details about INDIGO DataCloud QoS management.

Installation and Configuration  

You can found CDMI StoRM details about installation and configuration here.